TIM Gel (Two Part)

Brief Introduction

Aeroflex MG SERIES is a thermally conductive liquid gap filling material two-component, cured either at room or elevated temperature. Prior to curing, the material maintains good thixotropic characteristics, and is easy to dispense. The result is a soft, form-in-place elastomer ideal for combining fragile components with high topography and / or stack-up tolerances to general heat sink or housing. After curing, it won't pump from the interface as a result of thermal cycling and is dry to the touch.

FC@PROPERTIES FC@UNIT MG180 MG200 MG201 MG350 MG351 MG480
- - A B A B A B A B A B A B
Appearance - Yellow White Pink White Pink White White Blue White Grey White Grey
The Mixing Ratio - 1:1 1:1 1:1 1:1 1:1 1:1
Viscosity cps 250000 300000 250000 150000 150000 350000
Viscosity After Mixing cps 250000 300000 250000 150000 150000 350000
Minimum Use Thickness mm 0.05 0.05 0.05 0.05 0.05 0.05
Operating Time@25°C min 60 10~600 60 60 60 60
Curing Time(90%) min @100℃ 10 5~60 15 30 30 20
h @25℃ 6 1~72 4 15 15 8
    PROPERTY AS CURED
Hardness Shore OO 45 70 75 35 35 45
Thermal Conductivity  W/m·K 2.0 2.0 2.0 3.6 3.6 4.8
Thermal Resistance @50psi °C·in²/W ≤0.08 ≤0.08 ≤0.08 ≤0.06 ≤0.06 ≤0.04
Dielectric Strength (@1MM) kV ≥12 ≥9 ≥15 ≥10 ≥10 ≥9
Volume Resistivity Ω·cm ≥1.0X1013 ≥1.0X1012 ≥1.0X1013 ≥1.0X1012 ≥1.0X1012 ≥1.0X1012
Density g/cm³ 2.6 2.9 2.9 3.0 3.0 3.10
Dielectric Constant @1MHz 6.5 6.8 6.8 7.0 7.0 8.5
Small Molecule Cyclosiloxane (D4-D20) ppm ≤100 ≤100 ≤100 ≤50 ≤50 ≤30
CTE (Coefficient Thermal Expansion) ppm/°C 175 - - - - -
Flammability Rating UL. 94 V-0 V-0 V-0 V-0 V-0 V-0
Continuous Use Temperature °C -60~+200 -60~+200 -60~+200 -60~+200 -60~+200 -60~+200
RoHS Compliant - YES YES YES YES YES YES

Categories