SEA2010

Aeroflex  SEA2010 is a two-component thermally conductive RTV silicone sealant for insulating and protecting electrical and electronic components from application and environmental stresses. This rubber-like compound resists shock and vibration, intended for exclusion of moisture and corrosive agents. High conductivity makes Aeroflex  SEA2007 suitable for electronic components or packaging requiring heat dissipation while sealed.

Product Description Typical Property Data

FEATURES & BENEFITS 

  • Room temperature curing
  • Low viscosity
  • Easy to mix and use
  • Heat dissipation
  • RoHS compliant
  •  

TYPICAL APPLICATIONS 

  • LED lighting driver                        
  • Power modules / Inverters
  • Transformers / Ballasts                
  • Sensors product
  • Electric control units

USE PROCESS

1. Weighing: first, stir the contents in each container to avoid precipitate, then correctly weigh part A and part B.
2. Mixing: pour part B into part A and mix.
3. Potting: apply adhesive mixture onto electronic component as soon as possible.
4. Curing: complete curing process may take 10 to 24 hours at room temperature after less than half an hour of primary curing process. Elevated temperature will accelerate the process time.


STORAGE, TRANSPORTATION AND PACKAGE

  • Store in a cool dry place he shelf life is 1year @25°C
  • Such products are non-dangerous goods and transported as common chemicals.
  • Packaging: 40 kg set (Part A 20 kg /Part B 20 kg kettle) or 20 kg set (Part A 10 kg /Part B 10 kg kettle) .

 

FC@PROPERTIES FC@UNIT SEA2010
- - A B

Appearance

 -

Grey

White

Mix Ratio

 - 1:1

Viscosity

 cps 2900 3100

Viscosity as Mixed

 cps 3000

Pot Life

 min@25°C 60

Cure Schedule (90%)

 min@100°C 20
h@25°C 8

PROPERTY AS CURED

  

Hardness

 Shore OO 50

Thermal Conductivity

 W/m·K 0.95

Dielectric Strength

 kV(@1 mm) ≥15

Volume Resistivity

 Ω·cm ≥1.0X1014

Density

 g/cm³ 1.58

Dielectric Constant

 @1 MHz 3.2

Flame Rating

 UL. 94 V-0

Service Temp.

 °C -50~+200

Linear CTE (by DMA)

 μm/m·K or ppm 50

RoHS Compliant

 - Yes