SE1560 Thermally Conductive Silicone Encapsulant
Aerobon AERO-XERM SE1560 is a two-component silicone encapsulant designed to provide both high thermal conductivity and excellent flowability to electric/electronic applications.
Product Description
|
FEATURES AND BENIFITS
Low viscosity Room or elevated temperature Cure Low exotherm and stress High thermal conductivity High temperature resistant Non-flammable |
OPERATION PROCESS Mixing: Thoroughly mix each component prior to combining, Mix resin and hardener at a 1:1 ratio by weight or volume, until the color is uniform. Automatic mix/dispense equipment can be used for high volume production. Vacuuming are recommended to eliminate the air bubbles during the mixing. Curing: the mixed encapsulant can be cured for 30 minutes at 80°C, or 24 hours at room temperature, Avoid applying to substrates containing inhibitors like amine, sulfuer or tin salts. |
TYPOCAL APPLICATIONS On board charger Battery assembly Automotive Communication components |
SHELF LIFE/STORAGE
Shelf life of each component is 9 months from date of manufacture when stored at 10-25°C in original unopened container. |
|
PROPERTIES |
Unit |
SE-1560 Resin |
SE-1560 Hardener |
Mixture |
|
Appearance |
- |
Gray liquid |
White liquid |
Gray liquid |
|
Viscosity @ 60°C |
cps |
4100 |
4100 |
4100 |
|
Specific Gravity |
- |
2.57 |
2.57 |
2.57 |
|
Gel Time @80°C |
min |
- |
- |
5-9 |
|
Working life @25°C |
min |
- |
- |
60 |
|
Typical Cured Properties |
||||
|
Thermal Conductivity |
W/m·K |
ASTM 5470 |
1.5 |
|
|
Hardness |
Shore D |
ASTM D 2240 |
65 |
|
|
Lap Shear Strength |
MPa |
ASTM D 1002 |
0.6 |
|
|
Tensile Strength |
MPa |
ASTM D 638 |
0.7 |
|
|
Elongation at Break |
% |
ASTM D 638 |
30 |
|
|
Volume Resistivity @ 25°C |
ohm-cm |
ASTM D 257 |
1x1014 |
|
|
Dielectric Strength |
kV/mm |
ASTM D149 |
16 |
|