Aeroflex TG803NS

Aeroflex TG803NS is special designed for use in high performance devices requiring minimal thermal resistance for maximum thermal performance and eliminate silicone contamination. It requires no cure cycle and can be readily re-worked. This compliant material requires low compression force to conform over irregular interfaces and can be applied to single devices with minimum bond-line thickness as well as to multiple devices with variable tolerances.

Product Description Typical Property Data

FEATURES & BENEFITS
Thermal conductivity 3.5 W/m·k
Ultra low thermal resistance
Silicone free and RoHS Compliant
Ultra low compression force
Long-term reliability
High tack surface

 

TYPICAL APPLICATIONS
Automotive Electronic Control Units (ECU's)
Power Supplies & Semiconductors
Memory & Power Modules
Microprocessors / Graphics Processors
Flat Panel Displays & Consumer Electronics

 

CONFIGURATIONS AVAILABLE
30cc, 55cc, 180cc, 300cc Syringe. 
1kg, 10kg, 5 gallon pail.

CONFIGURATIONS AVAILABLE
30cc, 55cc, 180cc, 300cc Syringe. 
1kg, 10kg, 5 gallon pail.

 

PERFORMCE CURVE
FC@PROPERTIES FC@UNITS   FC@TEST METHOD TG803NS
Appearance -   Visual White
Flow Rate

g/min

   Aerobon 12
Thermal Conductivity

W/m·K

  

Hot disk

 3.50
Thermal Conductivity W/m·K

 

 ASTM D5470 3.50

Thermal Resistance@ 20 psi

°C·in2/W

  

ASTM D5470

 0.07

Thermal Resistance@ 20 psi

°C·cm2/W

  

ASTM D5470

 0.45
Min. Used Thickness

mm

   Aerobon 0.06
Flame Rating -  

U.L.

 94 V-0
Volume Resistivity

Ω·cm

  

ASTM D257

 ≥1.0×1013
Dielectric Strength

kV(@ 1mm)

  

ASTM D149

 ≥8
Density

g/cm3

  

ASTM D792

 3.05
Dielectric Constant

@1 MHz

  

ASTM D150

 6.5

TML (CVCM)

%

  

ASTM E595

 ≤0.15 (0.05)
CTE (Coefficient Thermal Expansion)

ppm/°C

   ASTM E831 225
Service Temp.

°C

   Aerobon -55 to 150
RoHS Compliant -   Aerobon Yes