AERO-CURE CG-7010AD

AERO-CURE CG-7010AD, an Aerobon's proprietary product, is a Silver/Aluminum conductive FIP gasket cured at room temperature. With guaranteed excellent adhesion strength and dispensing flow rate, it features high conductivity by adjusting ingredients mixing ratio. It also has good corrosion resistance and high reliability after curing.
With low hardness, good elasticity and low compression set, AERO-CURE CG-7010AD has good adhesion to metal and plastic surfaces. The product can be applied to optical transceivers, telecommunication base stations, radar equipment, handheld device and critical industrial applications.

Product Description Typical Property Data

Features and Benefits

  • Corrosion resistance, good choice for outdoor application;
  • Excellent EMI shielding effectiveness, over 100dB;
  • Room temperature curing to avoid negative impact on enclosure and other component(s);
  • Saving on raw material, assembly labors;
  • Saving on tooling costs, allowing fast prototyping.

 

Dispensing Size

  • Minimum: width 0.6 × height 0.4 (mm)
  • Recommended: width 1.0 × height 0.73 (mm)
  • Maximum: width 2.5 × height 1.7 (mm)

Note:
1. Dispensing cross section defaults to D shape, Δ shape is determined as per actual product.
2. When dispensing size exceeds the maximum limit, elastomer strip is recommended.  

                 

Compression-Deflection Curve H0.9mm*W1.1mm*L10mm, D-shaped strip 
FC@PROPERTIES FC@UNIT FC@TEST METHOD CG-7010AD
Benefit - - Corrosion resistance
Conductive Materials - - Ag/Al
Base Material - - Silicone
Curing Conditions - - Room temperature curing
Curing Temperature ℃ - 25
Curing Time - - 12h
Hardness Shore A ASTM D2240 60
Tensile Strength PSI ASTM D412 130
Elongation % ASTM D412 180
Density g/cm³ ASTM D792 2.2
Volume Resistivity ohm-cm MIL-DTL-83528C 0.008
Compression Rate @ 100 ℃ for 70 hours % ASTM D395-B 30
Working Temperature ℃ - -55~+125
Flame Retardant Grade (Between aluminum plates) - UL 94 V-0
Shielding Effectiveness (AVG 200mhz-18ghz) dB MIL-DTL-83528C >100
Adhesive Point Size W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-054 14
Dispensing Size @30% compression, W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-058 35

Minimum Recommended Value /

Maximum Recommended Value of Dispensing Size

 mm Width * Height

0.6*0.4/

2.5*1.7
Storage Time Month - 3
Storage Conditions ℃ - -30~-10