AERO-CURE CG-8020

AERO-CURE CG-8020, an Aerobon's proprietary product, is a conductive Nickel/Carbon FIP gasket for fast flow and cured at high temperature. With guaranteed adhesion strength and conductivity, it features fast flow rate by adjusting ingredients mixing ratio. High speed dispensing does not affect cross section shape.
With low hardness, good elasticity and low compression set, AERO-CURE CG-8020 has good adhesion to metal and plastic surfaces. The product can be applied to optical transceivers, telecommunication base stations, radar equipment, handheld device and consumer electronics.

Product Description Typical Property Data

Features and Benefits

  • Abrasion resistant, withstanding high temperature, high reliability;
  • Excellent EMI shielding effectiveness, over 90dB;
  • Room temperature curing to avoid negative impact on enclosure and other component(s);
  • Saving on raw material, assembly labors;
  • Saving on tooling costs, allowing fast prototyping.

 

Dispensing Size

  • Minimum: width 0.7 × height 0.5 (mm)
  • Recommended: width 1.0 × height 0.72 (mm)
  • Maximum: width 2.5 × height 1.7 (mm)

Note:
1. Dispensing cross section defaults to D shape, Δ shape is determined as per actual product.
2. When dispensing size exceeds the maximum limit, elastomer strip is recommended.  

                 

Compression-Deflection Curve H0.9mm*W1.1mm*L10mm, D-shaped strip 
FC@PROPERTIES FC@UNIT FC@TEST METHOD CG-8020
Benefit - - High velocity
Conductive Materials - - Ni/C
Base Material - - Silicone
Curing Conditions - - High temperature curing
Curing Temperature ℃ - 150
Curing Time - - 30min
Hardness Shore A ASTM D2240 60
Tensile Strength PSI ASTM D412 150
Elongation % ASTM D412 100
Density g/cm³ ASTM D792 1.9
Volume Resistivity ohm-cm MIL-DTL-83528C 0.03
Compression Rate @ 100 ℃ for 70 hours % ASTM D395-B 30
Working Temperature ℃ - -55~+125
Flame Retardant Grade (Between aluminum plates) - UL 94 V-0
Shielding Effectiveness (AVG 200mhz-18ghz) dB MIL-DTL-83528C >80
Adhesive Point Size W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-054 25
Dispensing Size @30% compression, W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-058 43

Minimum Recommended Value /

Maximum Recommended Value of Dispensing Size

 mm Width * Height

0.7*0.5/

2.5*1.7
Storage Time Month - 6
Storage Conditions ℃ - -30~-10