AERO-CURE CG-5011

AERO-CURE CG-5011 is an Aerobon proprietary product cured at room temperature and a FIP conductive gasket with tiny Silver/Nickel filler. With guaranteed excellent conductivity and dispensing flow rate, it is characterized by ultra-fine and smooth texture with well-proportioned ingredients. The FIP gasket can be dispensed onto a narrow ridged contact surface while maintaining designed cross section shape without deformation.

With soft texture, good elasticity and low compression set, AERO-CURE CG-5011 has good adhesion to various metal and plastic surfaces. The product can be applied to optical transceivers, telecommunication base stations, radar equipment, handheld devices and consumer electronics, etc.

Product Description Typical Property Data

Features and Benefits

  • Abrasion resistant, withstanding high temperature, high reliability;
  • Excellent EMI shielding effectiveness, over 90dB;
  • Room temperature curing to avoid negative impact on enclosure and other component(s);
  • Saving on raw material, assembly labors;
  • Saving on tooling costs, allowing fast prototyping.

 

Dispensing Size

  • Minimum: width 0.3 × height 0.3 (mm)
  • Recommended: width 0.5 × height 0.35 (mm)
  • Maximum: width 2.5 × height 1.7 (mm)

Note:
1. Dispensing cross section defaults to D shape, Δ shape is determined as per actual product.
2. When dispensing size exceeds the maximum limit, elastomer strip is recommended.  

                 

Compression-Deflection Curve H0.9mm*W1.1mm*L10mm, D-shaped strip 
FC@PROPERTIES FC@UNIT FC@TEST METHOD CG-5011
Benefit - - Superfine
Conductive Materials - - Ag/Ni
Base Material - - Silicone
Curing Conditions - - Room temperature curing
Curing Temperature ℃ - 25
Curing Time - - 24h
Hardness Shore A ASTM D2240 60
Tensile Strength PSI ASTM D412 200
Elongation % ASTM D412 180
Density g/cm³ ASTM D792 3.8
Volume Resistivity ohm-cm MIL-DTL-83528C 0.01
Compression Rate @ 100 ℃ for 70 hours % ASTM D395-B 30
Working Temperature ℃ - -55~+125
Flame Retardant Grade (Between aluminum plates) - UL 94 V-0
Shielding Effectiveness (AVG 200mhz-18ghz) dB MIL-DTL-83528C >90
Adhesive Point Size W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-054 13
Dispensing Size @30% compression, W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-058 19

Minimum Recommended Value /

Maximum Recommended Value of Dispensing Size

 mm Width * Height

0.3*0.3/

2.5*1.7
Storage Time Month - 3
Storage Conditions ℃ - -30~-10