AERO-CURE CG-9011

AERO-CURE CG-9011, an Aerobon proprietary product, is a "Fast Cure" Silver/Copper FIP conductive gasket cured at room temperature. With guaranteed conductivity and flow rate, it features shortened curing time by adjusting ingredients mixing ratio. The product is an ideal option for mass production.
With low hardness, good elasticity and low compression set, AERO-CURECG-9011 has good adhesion to metal and plastic surfaces. The product can be applied to optical transceivers, telecommunication base stations, radar equipment, handheld devices and consumer electronics.

Product Description Typical Property Data

Features and Benefits

  • Abrasion resistant, withstanding high temperature, high reliability;
  • Excellent EMI shielding effectiveness, over 90dB;
  • Room temperature curing to avoid negative impact on enclosure and other component(s);
  • Saving on raw material, assembly labors;
  • Saving on tooling costs, allowing fast prototyping.

 

Dispensing Size

  • Minimum: width 0.5 × height 0.25 (mm)
  • Recommended: width 1.0 × height 0.73 (mm)
  • Maximum: width 2.5 × height 1.7 (mm)

Note:
1. Dispensing cross section defaults to D shape, Δ shape is determined as per actual product.
2. When dispensing size exceeds the maximum limit, elastomer strip is recommended.  

                 

Compression-Deflection Curve H0.9mm*W1.1mm*L10mm, D-shaped strip 
FC@PROPERTIES FC@UNIT FC@TEST METHOD CG-9011
Benefit - - Surface-Q
Conductive Materials - - Ag/Cu
Base Material - - Silicone
Curing Conditions - - Room temperature curing
Curing Temperature ℃ - 25
Curing Time - - 12h
Hardness Shore A ASTM D2240 55
Tensile Strength PSI ASTM D412 130
Elongation % ASTM D412 150
Density g/cm³ ASTM D792 3.0
Volume Resistivity ohm-cm MIL-DTL-83528C 0.004
Compression Rate @ 100 ℃ for 70 hours % ASTM D395-B 30
Working Temperature ℃ - -55~+125
Flame Retardant Grade (Between aluminum plates) - UL 94 V-0
Shielding Effectiveness (AVG 200mhz-18ghz) dB MIL-DTL-83528C >90
Adhesive Point Size W1.1*H0.9*L10mm N/cm Aerobon QA-WI-054 12
Dispensing Size @30% compression, W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-058 40

Minimum Recommended Value /

Maximum Recommended Value of Dispensing Size

 mm Width * Height

0.5*0.25/

2.5*1.7
Storage Time Month - 3
Storage Conditions ℃ - -30~-10