AERO-CURE CG-9010

AERO-CURE CG-9010, an Aerobon proprietary high-end product, is a Silver/Copper conductive FIP gasket cured at room temperature. With guaranteed excellent adhesion strength and dispensing flow rate, it features high conductivity by adjusting ingredients mixing ratio. Abrasion resistance is an extra benefit from curing. With excellent conductivity, good elasticity and low compression set, AERO-CURE CG-9010 has good adhesion to metal and plastic surfaces. The product is intended for defense and critical industrial applications.

Product Description Typical Property Data

Features and Benefits

  • Abrasion resistant, withstanding high temperature, high reliability;
  • Excellent EMI shielding effectiveness, over 90dB;
  • Room temperature curing to avoid negative impact on enclosure and other component(s);
  • Saving on raw material, assembly labors;
  • Saving on tooling costs, allowing fast prototyping.

 

Dispensing Size

  • Minimum: width 0.6 × height 0.4 (mm)
  • Recommended: width 1.0 × height 0.73 (mm)
  • Maximum: width 2.5 × height 1.7 (mm)

Note:
1. Dispensing cross section defaults to D shape, Δ shape is determined as per actual product.
2. When dispensing size exceeds the maximum limit, elastomer strip is recommended.  

                 

Compression-Deflection Curve H0.9mm*W1.1mm*L10mm, D-shaped strip 
FC@PROPERTIES FC@UNIT FC@TEST METHOD CG-9010
Benefit - - High performance
Conductive Materials - - Ag/Cu
Base Material - - Silicone
Curing Conditions - - Room temperature curing
Curing Temperature ℃ - 25
Curing Time - - 24h
Hardness Shore A ASTM D2240 60
Tensile Strength PSI ASTM D412 130
Elongation % ASTM D412 150
Density g/cm³ ASTM D792 3.2
Volume Resistivity ohm-cm MIL-DTL-83528C 0.003
Compression Rate @ 100 ℃ for 70 hours % ASTM D395-B 30
Working Temperature ℃ - -55~+125
Flame Retardant Grade (Between aluminum plates) - UL 94 V-0
Shielding Effectiveness (AVG 200mhz-18ghz) dB MIL-DTL-83528C >100
Adhesive Point Size W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-054 12
Dispensing Size @30% compression, W1.1*H0.9*L10mm N/cm Aerobon  QA-WI-058 39

Minimum Recommended Value /

Maximum Recommended Value of Dispensing Size

 mm Width * Height

0.6*0.4/

2.5*1.7
Storage Time Month - 3
Storage Conditions ℃ - -30~-10